With the higher requirements of customers for product packaging, heat shrinking machine equipment appears in our processing enterprises. After heating, the shrink film wraps the product or package tightly, fully displaying the appearance of the product, improving the product’s displayability, and increasing its beauty and value. sense. Then, it is very necessary for some new users to know more about the use method and daily maintenance of the heat shrinking machine when they start to use it. Pay attention to the use method and maintenance details to ensure the normal use of the equipment and increase the heat shrinking machine. At the same time, it can produce more prominent product effects for the enterprise.
When the heat shrinking machine is in use, we must set the heating time for the machine, and press the button (manual or automatic, depending on the model of the equipment). The gear, so that the gear drives the chain to work, when the drying oven cylinder runs slowly to the top dead center, the timer at this time starts, starts to delay, and the solenoid valve of the rack cylinder is powered off. When the timing of the heat shrinking machine ends, the solenoid valve of the oven cylinder is de-energized.
The daily maintenance details of the heat shrinking machine are as follows:
First, when the heat shrinking machine works, be sure to carefully clean the sealing part with a soft cloth;
Second, when the heat shrinking machine is powered off, the moving parts, such as the deposits attached to the shaft, rod, bushing, chain and sprocket, must be cleaned regularly, and lubricating oil should be added regularly to ensure their movement. Cleanliness and lubrication of parts.
Third, before and after the operation of the sealing and cutting machine, be sure to check the main component of the sealing and cutting machine – the cutter, and be sure to do a good job of protecting the contact surface of the sealing and cutting blade, that is, the silicone strip. The effect of sealing and cutting is good, and the effect of heating the shrink film to wrap the product or package tightly when using the heat shrink machine is good.
Fourth, if the sealing and cutting knife cannot be used normally due to wear and tear, the sealing and cutting knife must be replaced to work normally.
When we use the heat shrinking machine, we must combine the sealing and cutting machine to achieve the sealing and cutting effect, and then pay attention to the correct use method and daily maintenance of the heat shrinking machine. Only by ensuring the normal operation of the equipment can we package the product better. Effect.